Before you start
You need Paramodo installed in SketchUp desktop. Check compatibility and installation instructions before opening your first model. Complete any account or licence prompts shown by Paramodo.
This guide uses Starter: one building with a rectangular base and one module. Custom facade controls, imported footprints, and multiple building groups are not needed for this exercise.
The screenshots and the video come from an internal Paramodo demo. We recorded it on October 5, 2026, in SketchUp 2026 with a development build, so the controls may look different in your installed version. Use the values below to follow the same sequence.
1. Open Paramodo and create a module
Start a new SketchUp model. Open Paramodo from the Extensions menu and choose Create module. If a module already exists, select it instead of adding another one.
A module is a part of the building you can edit through Paramodo’s parameters. Use just one for this exercise so each change is easy to see.
2. Set a rectangular massing concept
Keep Base shape set to Rectangular. In the form and dimensions controls, set Width X, Length Y, Floor height, and Levels.
Use the units shown by the length controls. For example, 18 metres is 18,000 millimetres; do not enter 18 into a millimetre field when you mean 18 metres.
| Control | Example target |
|---|---|
| Width X | 18 m (18,000 mm) |
| Length Y | 14 m (14,000 mm) |
| Floor height | 3 m (3,000 mm) |
| Levels | 6 |
Confirm each edit and let the model update before changing another control. You should see a rectangular building with six levels.

Widen the footprint
Increase Width X from 18,000 mm to 26,000 mm. Leave Length Y at 14,000 mm and Levels at 6. The building becomes wider while its length and floor count stay the same.

Lengthen the footprint
Now increase Length Y from 14,000 mm to 20,000 mm. Keep Width X at 26,000 mm. Compare this longer footprint with the previous view before adding more floors.

3. Explore a taller option
Change Levels from 6 to 10. Keep the 26 m × 20 m footprint and 3 m floor height unchanged.
The model should now have ten levels with the same rectangular footprint.

Compare the taller building with the six-level view above.
4. Review and save the model
Orbit around the building and check its footprint and level count. Look at the project statistics available in Paramodo to review the current concept.
Save the SketchUp model as a .skp file. This saves the model itself. You do not need to import or export a Paramodo settings preset for this exercise.
Watch the recorded sequence
Internal product demonstration. The video shows the same edits as this guide: Width X, then Length Y, then Levels, and finally a return to the starting values. It combines model and interface captures edited for the demonstration.
The recording does not measure generation time, slider responsiveness, or time saved compared with manual modelling. For changes in published versions, see the release notes.
If a step does not work
- Paramodo is missing: check that the extension is installed and enabled in Extension Manager.
- A control is locked: stay with a rectangular base and basic dimensions for this exercise. Custom footprints and advanced authoring have separate plan requirements.
- A length looks too small or too large: check the unit displayed by that control and enter the equivalent value.
- The update takes longer than expected: reduce the floor count and try one simple module first. A GPU is not required for basic generation.
If the issue continues, send a question with your SketchUp version, Paramodo version, and the step that failed.
Continue with another option
Try a different footprint proportion or floor count in the same module. Starter allows up to three modules within one building, but this exercise only needs one.
For a comparison of building proportions, follow the massing workflow. To work on custom facades, check the Pro plan and try the facade workflow.